Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:artikel:nav_common:mainboard_service_connectors [Thu. 07.02.2019 07:38] (current)
go4it created
Line 1: Line 1:
 +====== Service connectors on the mainboard ======
 +
 +===== Pinout of service plug "​X800" ​ =====
 +
 +  * Type: 16-pos, Micromatch
 +  * Color: Orange
 +  * Manufacturer:​ "​GARRY"​
 +  * Partnumber: "MPE 374-1-016"​
 +
 +{{artikel:​nav_fx:​mainboard_serviceport_pinout.jpg?​direct|}}
 +
 +^ Pin ^ Bezeichnung ^ Signalpegel ^ Funktion ^
 +| 1 | GND  | - |  |
 +| 2 | V850_MUX ​ | 3,3V | :?: |
 +| 3 | /​V850_RESET ​ | 3,3V | Active low reset signal of V850 Radioprocessor |
 +| 4 | V850_UART_IN ​ | 3,3V | Serieller Eingang (RX) des Radioprozessors (Debug-UART) |
 +| 5 | V850_UART_OUT ​ | 3,3V | Serieller Ausgang (TX) des Radioprozessors (Debug-UART) |
 +| 6 | V850_VPP_ON ​ | 3,3V | :?: |
 +| 7 | GND  | - |  |
 +| 8 | JTAG_VTref ​ | 3,3V | JTAG signal voltage reference |
 +| 9 | JTAG_TDO ​ | 3,3V | JTAG Signal "​Test-Data-Out"​ |
 +| 10 | JTAG_TCK ​ | 3,3V | JTAG Signal "​Test-Data-Clock"​ |
 +| 11 | JTAG_TMS ​ | 3,3V | JTAG Signal "​Test-Mode"​ |
 +| 12 | JTAG_TDI ​ | 3,3V | JTAG Signal "​Test-Data-In"​ |
 +| 13 | JTAG_TRST ​ | 3,3V | JTAG Signal "​Test-Reset"​ |
 +| 14 | GND  | - |  |
 +| 15 | JTAG_RTCK ​ | 3,3V | JTAG Signal "​Test-Data-Remote-Clock"​ |
 +| 16 | GND  | - |  |
 +
 +===== Pinout of service plug "​X3806" ​ =====
 +
 +{{artikel:​nav_fx:​mainboard_serviceport2_pinout.jpg?​nolink|}}
 +
 +^ Pin ^ Bezeichnung ^ Signalpegel ^ Funktion ^
 +| 1 |  |  | :?: |
 +| 2 |  |  | :?: |
 +| 3 | GND  | - |  |
 +| 4 |  |  | :?: |
 +| 5 |  |  | :?: |
 +| 6 |  |  | :?: |
 +| 7 |  |  | :?: |
 +| 8 |  |  | :?: |
 +| 9 |  |  | :?: |
 +| 10 |  |  | :?: |
 +| 11 |  |  | :?: |
 +| 12 |  |  | :?: |
 +| 13 | /V850_HALT | 3,3 V | LOW = Radioprozessor (und Watchdog) stoppen |
 +| 14 | U14 | +14V | Bordspannung vom Radio (9-15 V) |
 +
  
  • en/artikel/nav_common/mainboard_service_connectors.txt
  • Last modified: Thu. 07.02.2019 07:38
  • by go4it