Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:artikel:fahrzeugkonfiguration:komponenten [Tue. 02.04.2019 21:40] (current)
jphid created
Line 1: Line 1:
 +FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
 +
 +====== Components ======
 +
 +===== Configuration parameters =====
 +
 +For each trim level of the vehicle, there will be a parameter that can take a number of possible values. An overview of all the different parameters, as well as their function and how to change their values can be found here: [[artikel:​fahrzeugkonfiguration:​start]].
 +
 +===== The As-Built data =====
 +
 +It contains the vehicle configuration as it was delivered from factory. Thanks to EU regulations,​ it must be available to end customers.
 +
 +===== Master storage of the CCC in the BCM =====
 +
 +The BCM (Body Control Module) contains the master copy of the vehicle'​s configuration. It will constantly retransmit it over the HS and MS CAN buses. Systems connected to the MM CAN bus will receive the CCC transmission through the IPC, that will act as a gateway between the different CAN buses.
 +
 +===== Backup storage of the CCC in the IPC =====
 +
 +A backup copy of the CCC is stored in the IPC. It is totally independent from that of the BCM and it is used as a fast recovery method in case of errors. Therefore, the vehicle'​s central configuration is doubly redundant.
 +
  
  • en/artikel/fahrzeugkonfiguration/komponenten.txt
  • Last modified: Tue. 02.04.2019 21:40
  • by jphid